News center

During the operation of the slitting machine, only maintenance and upkeep should be performed on the equipment. Prolonged vibration during operation may cause loosening in various components. To ensure optimal performance of your equipment, regular maintenance should be conducted at specified intervals.
How to Maintain the Slitting and Slitting Machine:
1. Regularly inspect the embossing rollers and brake pads on the unwinding shafts. Replace brake pads immediately upon detecting excessive wear;
　　2. Regularly lubricate all drive sprockets and chains with machine oil. Apply grease or lubricating grease to worm gear assemblies;
3. Internal gears within the gear housing are pre-lubricated with grease at the factory and require no additional lubrication;
　　4. Inspect all air lines for leaks. Replace fittings or seals if leaks are found;
5. Regularly drain water from the water separator air filter. Frequently replenish light machine oil in the oil mist lubricator;
6. Keep the machine clean by wiping it down regularly. Absolutely prohibit affixing tape haphazardly on the machine.
　　Mastering the maintenance methods for slitting and slitting machines not only ensures the machine operates normally and efficiently but also guarantees paper output efficiency. It reduces malfunctions caused by improper operation and lowers the risk of personal injury.